工厂电工英文自我评价

工厂电工英文自我评价1

　　Over the past year, I have been dedicated to work in a creative and loving way, and have achieved some achievements. However, there are also some problems and shortcomings, mainly in the following points:

　　1. Safety aspects

　　Safety management did not do bit, strength is not enough; safety training is not in place; check not in place. In many cases, due to the labor intensity of the staff is larger, more physical exertion, so the completion of the day's output, do the work of sorting the scene ignored the phenomenon, there are irregularities in the operation of the repeated repeated crushing accidents . Now want to come to these accidents, I have an inescapable responsibility. First: in the organization and management team in the process of daily safety training is not really so that every employee will always be safe production in mind; Second: in the security check did not do the whole process of tracking the entire inspection; Finally: in the event of an accident did not promptly Sum up lessons learned to avoid the recurrence of similar incidents. So that my staff suffered pain, so that the damage to the honor and interests of the workshop I am very self-blame. To this end, I decided to work in the future to strengthen the intensity of safety training and improve the form of training and strengthen the security team security responsibilities, so that each team staff are aware of the importance of safety in production, resulting in "everyone's attention to safety Production, everyone involved in production safety, "a good atmosphere.

　　2. Quality control aspects

　　Quality is produced, rather than check out, that is to say about total quality management, in accordance with the objectives and requirements to seriously do a good job in every aspect, every process.At the same time quality inspection is very important, especially in the production process of quality inspection can effectively avoid the occurrence of quality accidents and quality problems, after the event for the prevention and control in advance, change from passive to active.Although the company from top to bottom are beginning to pay attention to quality, but in practice there are still many problems, especially between the team, for example, in the weaving process there are many areas to be improved. To solve these problems is not a team can do a good job, which requires a number of relevant team work together, I think in order to do a good job of quality, we must grasp the "strict, fine, real" principle, to strict management, Careful and meticulous, pay close attention to implementation.

　　3. Team management

　　Although the management level of the team has been improved in the past year, there are still some problems, such as: the standardized work situation of the staff to be improved, the technical level of the staff to be improved, the enthusiasm of the staff has not been fully mobilized Wait.No high-level management, there is no high-quality staff, there is no high-quality products. Therefore, I will focus on the future work to improve the overall quality of the team and staff issues, make full use of spare time, and more arrangements for some of the knowledge of the standardization of training, strive for a shorter period of time so that the overall quality of staff has a larger Promotion.

　　Future efforts

　　The new year represents a new beginning, new opportunities and new challenges. I will redouble their efforts to seriously improve the business, the level of work for the company and workshop development, contribute their own strength.

　　I am determined to do the following in the following year:

　　1. Strengthen learning, broaden the knowledge. Strive to study stamping expertise and related management knowledge;

　　2. In the principle of seeking truth from facts, so the situation issued, the next situation reported; really good leadership of the assistant;

　　3. Strengthen communication and cooperation with the workshop brothers and team, to the advanced team to learn, strengthen management, and strive to make the team to form a solid, hard work and good atmosphere;

　　4. Fully completed the workshop to the various tasks for the workshop to bring out a tough fight, hard-working team.

　　Finally, I hope the company leadership in the future work, as always, support me, I will be more outstanding performance of the company's return on the leadership of care and love, because I will always work!Thank you!

工厂电工英文自我评价2

　　Since the beginning of my career, I have been constantly strengthening my self-cultivation, striving to improve the ideological and moral level, earnestly carry out the deepening of the cultural and professional knowledge, continue to explore new knowledge, forge ahead, and actively carry out intelligent range The work, the complete performance of a electrician's work responsibilities, from a good example to take the lead role. And actively participate in technological exchanges and technological innovation activities, the earth to do a good job, help, with the role, and fully completed the tasks assigned to the higher levels and targets in the company's production and development play its due role.Now I have been working since the professional and technical work are summarized as follows:

　　First, consciously strengthen theoretical study, and strive to improve personal qualities

　　Without a firm and true political orientation, there will be no positive guiding ideology. In order to continuously improve their political and ideological quality, the past few years I have been very concerned about national affairs, concerned about the situation at home and abroad, combined with the impact of changes in the situation of enterprises to analyze and put this idea into practical action to the production process to ensure In their thinking and action has always been consistent with the party and enterprise. At the same time, this idea into the work and study, the constant pursuit of their own progress. In order to be successful, a person's career must first learn how to behave! Especially in our highly technical work, to see things carefully, do things to concentrate on, to learn to be modest. Can not have the slightest sloppy and error. All the first work attitude to correct, have a good professional quality, work to be serious and responsible, subject to leadership arrangements, open to others to listen to advice and advice, to unite colleagues, courtesy, warm service.

　　Second, correct work attitude, play a leading role

　　I fully understand the importance of mechanical and electrical management during the construction period. In particular, it contains most of the invisible electrical infrastructure and engineering. It is necessary to supervise and inspect the problems at any time. We must solve the problems and never hastily. Otherwise, Eradication, which we place mechanical and electrical management in front of a test and responsibility. As an electrician, the responsibility and the burden of my duty. Therefore, in the usual work, I made myself some of the strict requirements: one in the face of dirty tired and bitter at work to grab the front of the workers dry, and more than the workers do the next; In the face of technical problems is to come forward and do their best to overcome technical difficulties; I always adhere to do my best to do everything to the interests of the company. Third, I asked myself to be responsible; I think that since he is an electrician, then the level of business and many other aspects of the general workers should be stronger than some. In the company assigned tasks, the general workers to complete the more difficult tasks, they should take the initiative to take on more, but not with the workers buck-passing, to make the teacher who demeanor, Yong burden. I usually not only ask their own, in practice, I also do according to these requirements.

　　Third, strengthen business learning, improve the technical level

　　Science and technology continue to develop today, one day do not learn to be backward. In particular, this piece of electrical automation, no one hundred percent of all proficient in finished, so I usually have time to look at professional books. Over the past year, I have collected a large number of new professional books, constantly enrich themselves, continue to grasp the new knowledge. Such as "electrical design drawing", "electronic technology", "modern frequency technology", "DC in industrial applications" and so on, in the process of learning this knowledge, I learned a lot of new knowledge, such as: PLC programming control Principle, ABB inverter settings and control principles, SIPMOS high-power two-way SCR control principle, and so I really benefit! Not only broadened my knowledge, is still largely improved my technical level, But also I have a higher level of theoretical and technical knowledge of the study had a keen interest.

　　Fourth, the development of skills to each other to achieve social services

　　In the usual work, I often carry out technical discussions and exchanges with other workers, to share their knowledge and share with others, and learn from others who do not understand their knowledge and achieve common progress. I am fully integrated theory and practice, continue to accumulate experience, continue to study new business, which makes my skill level to a skilled, use the ease of the point.

　　To sum up, I feel worthy of the honorable title of electrician! But I, as a technical staff, can not be narcissistic now, but still continue to strengthen their own learning, continue to learn from each other, and only then can keep up with The pace of the times steady progress, but also be able to better serve the enterprises and serve the community.

工厂电工英文自我评价3

　　In the long-term work practice adhere to the "safety first, prevention first", strictly enforce the safety rules and regulations, based on their own positions, take the initiative to play a subjective initiative at the same time, adhere to the standard criteria for strict requirements themselves,Amount to complete the production work tasks.

　　Style solid, hard work hard working. Can strictly according to the standardization request, the procedure, the system and the measure, carries out each work, when meets the difficulty, perseverance, takes the initiative to overcome the difficult question which faces to face each duty which the leadership delivers. In the early stage of the workshop merger, the working facilities of the newly established Lechang power supply workshop were not complete. The workshop network could not be used. In order to transmit the production information in time, the communication equipment was put into operation to ensure the smooth flow of production information. In 20xx, I carried out the first contact catenary repair, as a electric power for the contact network focused on the preparation of the work plan, from learning to application, from ignorant to gradually understand, all embodies the tenacious struggle of professionalism.

　　Consciously strengthen the theory and business learning, theory and practice for the workshop safety management services. In daily production and life of diamond business technology and adhere to the modern business culture and scientific knowledge, and constantly improve their theoretical level, business ability and quality of cultivation, and focus on the knowledge used in production safety practice, with the workshop leaders do a good job in production management, For the first-line production to contribute. In the early 20xx to combat snow and ice disaster work, take the initiative to grasp the front-line dynamic information on the scene of the fault repair situation, equipment dynamic situation in a timely manner to make statistics, summarize, reported materials for the leadership to understand the dynamics of the scene to provide first-hand information, Quickly convey the higher order, whether fault repair or normal equipment inspection, regardless of day and night, adhere to earnestly complete all the summary of statistical materials reported work.

　　Team management and construction work, work independently. Since the team to play the team building management work, to combine the safety management team, closely around the theme of security work, to be diligent in thinking, to explore, loyalty, dare to dare tube, dare to dare to listen to team Staff advice, subject to the workshop leadership arrangements, do the right to insist on doing a good job, there are gaps in the initiative to find reasons, adjust the working methods, so as to sum up experience and improve the quality of work. Lechang power supply plant tube equipment scattered, daily management team and complex work, bow net, hydropower all kinds of professional team has to distinguish between different types of work groups of relatively unified management, no doubt with considerable difficulty, need to pay more labor , Often without rest for this day and night to work.